Capnut Terminations are designed to be used where underground cables are connected to generators, switchgear, transformers, overhead lines or sectionalizing equipment. All terminations are tested in accordance with IEEE 48, 1975.
Used to terminate insulated cables connected to generators, switchgear, transformers, overheads lines, or sectionalizing equipment.
Single conductor units in ratings of 15kV, 25kV, 34.5kV, and 46kV
Three conductor units are rated 15kV, 25kV, and 34.5kV
Bracket and flange mount models for pole or equipment mounting
Accepts any construction of solid dielectric, paper insulated or armored cable
Modular design allows for customization based on application and cable design
Tape stress cone allows for field adaption when working with legacy cable systems where information may be limited
| Voltage | 15 | 25 | 34.5 | 46 |
| BIL (kV) | 110 | 150 | 200 | 250 |
| Current Rating | Same as cable | Same as cable | Same as cable | Same as cable |
| 1 minute dry, ac (kV) | 50 | 65 | 90 | 120 |
| 6 hour dry, ac (kV) | 35 | 55 | 75 | 100 |
| 10 second wet, ac (kV) | 45 | 60 | 80 | 100 |
| 15 minute dry, dc (kV) | 75 | 105 | 140 | 170 |
| Cable Type | WS | WSV-CC | WSV-AC | WSV-WAF | RS | RSF-CC | RSF-AC | RSF-WAF | RSA | DP | DP-CC | DP-EE-AC | DP-EE-WAF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PILC VCLC RILC | 1 or 3 Conductor | 3 Conductor | 1 or 3 Conductor | 3 Conductor | 3 Single Conductors | 3 Single Conductors | |||||||
| EPR XLP | 1 or 3 Conductor | 3 Conductor | 3 Single Conductors | 3 Single Conductors | |||||||||
| High mole Polyethylene and Kerits | 1 or 3 Conductor MAY REQUIRE TUBE SEAL | 3 Conductor MAY REQUIRE TUBE SEAL | 3 Single Conductors MAY REQUIRE TUBE SEAL | 3 Single Conductors MAY REQUIRE TUBE SEAL | |||||||||
| Flat Steel Armored | 3 Conductor | 3 Conductor | 1 or 3 Conductor | ||||||||||
| Interlocked* Armor | 3 Conductor | ||||||||||||
| Wire Armor | 3 Conductor | 3 Conductor | 1 or 3 Conductor | ||||||||||
| Type CCE Split Conduit Extension Adaptable | √ | √ | √ | √ | √ | √ | √ | √ | √ | ||||
| *Application on cable with a solid jacket under the armor. For cables with a jacket over the armor, a cable entrance fitting combination (DP3-EE-EE-GL-ACC-DP-1) can be used. | |||||||||||||
| Aerial Lugs Accessories include: Style 3-D Clamp style, Style 8 Bertial 4 hole and Style 18 Horizontal Bus style | |||||||||||||
| Novoid Accessories include: Novoid A and Novid X for use with PILC Cable, Novoid A and Novoid 224 for use with XLPE/EPR. | |||||||||||||
| Novoid 224 not applicable with PILC Cable. Novoid X not applicable with XLPE/EPR. | |||||||||||||